This site works better with javascript enabled.
Quick Connect Couplings - Self-Venting
Rectus Safety coupling with a self-venting system according to ISO C. Self-venting takes place during disconnection – no risk of pressurised hoses being tossed around. When the sleeve is pulled back, the plug is released yet remains locked in. The coupling valve closes and the air is vented from the air line at the same time. Only then, by operating the sleeve again, can uncoupling take place safely. The system fulfils the requirements of ISO 4414 – increased safety standards in the work place. The plastic sleeve does
not scratch working surfaces.
Remove all filters Productgroup
Material
Connection type
Connection to hose
Make Your first choice [?]
- (6)
Brass / Steel Nickel Plated
- (31)
Brass Nickel Plated
- (10)
Steel
- (10)
Steel Nickel plated
- (17)
Female Thread - parallel
- (22)
Hose Barb
- (9)
Male Thread - parallel
- (9)
Male Thread - tapered
- (9)
G 1/2
- (8)
G 1/4
- (2)
G 3/4
- (10)
G 3/8
- (2)
R 1/2
- (2)
R 1/4
- (2)
R 3/8
- (5)
for hose ID 10 mm
- (5)
for hose ID 13 mm
- (3)
for hose ID 5 mm
- (2)
for hose ID 6 mm
- (3)
for hose ID 8 mm
- (4)
for hose ID 9 mm