You will be redirected to our Chinese website.

This site works better with javascript enabled.



 Installed sparger assembly

Figure 1.  


In bioreactor systems, optimal mass transfer of gases like O2 (oxygen) or CO2 (carbon dioxide) is difficult to accomplish. Oxygen, in particular, is poorly soluble in water, and even less so in cell culture and fermentation broths. Oxygen transfer is aided by agitation to mix nutrients and to keep the cell culture or fermentation homogeneous. There are limits to agitation speed due to high power consumption as well as damage to organisms resulting from excessive tip speed. 

Agitation alone does not provide adequate mass transfer. Using a porous metal sparger greatly increases mass transfer rates in this equipment. The introduction of gases into stirred or unstirred reactor vessels via millions of tiny bubbles increases the gas-to-liquid contact areas allowing for optimal mass transfer rates. In-tank applications, with sparging elements located inside the tank, can be batch or continuous flow, with or without agitation.

With the Quick Change Sparger system (see Figure 1), the porous metal element can be removed and replaced after each use. This eliminates the need to re-weld the tip or clean the entire assembly.

Porous metal applications in the biotechnology and pharmaceutical industries include:

Bioreactor/fermentor process gas spargers
Steam filters
Steam spargers
Gas-line filters

No need to reweld the sparger tips


After each batch, a new tip can be installed on the end of the assembly and is ready for steam-in-place operation. Or the sparger tip can be cleaned out-of-place using a number of methods, including ultrasound or a detergent and water flush.

Either way, the Quick Change Sparger can help make sparger change out simple and easy. Changing to new clean sparger tips after each batch is an excellent method of maintaining GMP process validation methods.

Teesing does not supply the Sparger Wand as this is readily available equipment which can be modified with the Trident adapter to accept the removable porous metal sparger tips.

 Installed sparger assembly

PROBLEMS incurring while INJECTing Oxygen or carbon dioxide INTO LIQUIDS

High energy costs and low performance? 
Spargers need decreased agitation while achieving higher O2 or CO2 absorption.

Save welding time 
With the Quick Change Sparger system the porous metal element can be removed and assembled more quickly.

High gas usage? 
Spargers provide smaller bubble size for higher surface contact ratio, reducing the total volume of gas used

Internal designers unfamiliar with proper sizing and design? 
Our team of engineering and application experts are available to assist in sizing or overall design. 



✔ TIP: Download the sparger design guide & part selection. 



Air injection for mixing liquids


O2 and CO2 injection for mixing liquids in a reactor or fermentor.

More information

Bioremediation air sparging

Waste water treatment

Adding O2 and O3 to purify and supply oxygen to municipal water supplies.

More information

Fermentation oxygen or air sparging


Oxygen or air sparging to enhance cell growth in fermentation reactions.

More information

Ozonation ozone sparging to sanitize


Sparging to promote effective yeast propagation in the fermentors.

More information


Interested in this application

You must fill in all fields marked with *, otherwise we can not process your request.

More information?

Please contact our Project Coordinator:

Stephen de Ruijter

Project Coordinator

+31 70 413 07 49
+31 6 48 93 08 20